Ratings

Rated supply voltage	100 to 240 VAC, 50/60 Hz 100 to 125 VDC, ripple: 20% max.
Operating voltage range	85% to 110% of rated supply voltage
Input signals	Reset, Start, Gate
Power consumption (Relay ON)	Approx. 2 VA, 1.6 W (at 240 VAC, 60 Hz)
Power consumption (Relay OFF)	Approx. 1.3 VA, 1.1 W (at 240 VAC, 60 Hz)
Reset voltage	10% max. of rated supply voltage
Number of time ranges	14
Time ranges	0.05 s to 1.2 s, 0.12 min to 1.2 min, 0.12 h to 1.2 h, 1.2 h to 12 h, 0.3 s to 3 s, 0.3 min to 3 min,0.3 h to 3 h, 3 h to 30 h, 1.2 s to 12 s, 1.2 min to 12 min, 12 h to 120 h, 3 s to 30 s, 3 min to 30 min, 30 h to 300 h
Operating mode	ON delay, Flicker ON start, Interval, One shot output
Control output Type	Relay output (DPDT)
Control output (Contact output)	Switching capacities (resistive load (cos(phi)=1)): 250 VAC 5 A, 30 VDC 5 A Minimum applicable load: 10 mA at 5 VDC (failure level: P)
Ambient temperature	Operating: -10 to 55 CEL Storage: -25 to 65 CEL (with no icing)
Ambient humidity	Operating: 35 to 85% Storage: 35 to 85%

Characteristics

Accuracy of operating time	+/-0.2 % (FS) max. (+/-0.2% +/-10 ms max. in a range of 1.2 s and 3 s)
Setting error	-5 to 5% (FS) -50 to 50 ms max.
Reset time	0.1 s max.
Influence of voltage	+/-0.2% FS max. (+/-0.2% +/-10 ms max. in a range of 1.2 s and 3 s)
Influence of temperature	+/-1% FS max. (+/-1% +/-10 ms max. in a range of 1.2 s and 3 s)
Insulation resistance	100 MOhm min. (at 500 VDC)
Dielectric strength	between current-carrying metal parts and exposed non-curernt-carrying metal parts: 2000 VAC, 50/60 Hz for 1 min between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min between contacts of different polarities: 2000 VAC, 50/60 Hz for 1 min between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min
Impulse withstand voltage	between power terminals: 3 kV between exposed non-current-carrying metal parts: 4.5 kV max.
Noise immunity	+/-1.5 kV (between power terminals) and +/-600 V(between input terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 us, 1-ns rise)
Static immunity	Mulfunction: 8 kV Destruction: 15 kV
Vibration resistance (Destruction)	10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 2 hours
Vibration resistance (Malfunction)	10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10min
Shock resistance (Destruction)	1000 m/s2 3 times each 6 directions
Shock resistance (Malfunction)	100 m/s2 3 times each 6 directions
Mechanical Life expectancy (relay output)	20000000 operations min. (under no load at 1800 operations/h)
Electrical Life expectancy (relay output)	100000 operations min.(5 A at 250 VAC, resistive load at 1800 operations/h)
Degree of protection	IEC60529(JEM): IP40(panel surface)
Applicable standard (UL)	Standard No.: UL508 File number: E41515
Applicable standard (CSA)	Standard No.: CSA C22.2 No.14 File number: LR22310
Applicable standard (LR)	99/10010
Applicable standard (NK)	A-323-1B
Applicable standard (EC Directive (Low Voltage Directive) )	EN61812-1 IEC60664-1 4 kV/2
Applicable standard (EC Directive (EMC Directive) )	EMI: EN61812-1 Emission Enclosure: EN55011 Group1 class A Emission AC mains: EN55011 Group1 class A EMS: EN61812-1 Immunity ESD: IEC61000-4-2(6 kV contact discharge, 8 kV air discharge) cRF-interference: IEC61000-4-3(10 V/m, AM radio wave (80 MHz to 1 GHz), 10 V/m, Pulse-modulated waves (900 MHz +/- 5 MHz)) Immunity Conducted Disturbance: IEC61000-4-6(10 V (0.15 to 80 MHz)) Immunity Burst: IEC61000-4-4(2 kV power-line, 2 kV I/O signal-line) Immunity Surge: IEC61000-4-5(1 kV line to line, 2 kV line to ground)
External connection method	8-pin round socket
Case color	Munsell 5Y7/1(Light gray)
Weight	Approx. 90 g